Connect with us

Motorola Satellite Box - IR Codes

Discussion in 'General Electronics' started by David M, Feb 26, 2005.

Scroll to continue with content
  1. David M

    David M Guest

    Hi,

    I'm building an IR remote control box. One of the devices it must
    control is a Motorola DTH335 satellite box.

    I have taken a look at the codes the supplied remote sends - using a
    universal IR capture box. These appear to be sent at 38KHz and use
    the NEC protocol (except it's modified in that the second address bit
    does not seem to be the inverse of the first).

    However the Motorola box is having trouble receiving these codes
    consistently.

    My new control also has codes to control a Panasonic TV (using the
    Panasonic protocol) and this works fine - every time.

    It's just the Motorola box that is fickle - has anyone got any clues
    as to what could be going on.

    Thanks

    David
     
Ask a Question
Want to reply to this thread or ask your own question?
You'll need to choose a username for the site, which only take a couple of moments (here). After that, you can post your question and our members will help you out.
Electronics Point Logo
Continue to site
Quote of the day

-