Connect with us

MOT Help

Discussion in 'General Electronics Discussion' started by Wettfeat, Nov 23, 2012.

Scroll to continue with content
  1. Wettfeat

    Wettfeat

    1
    0
    Nov 23, 2012
    Hey guys,

    I'm new here, I have a MOT because I'm trying to make a spot welder but I'm not sure where to solder the leads from the power plug to. Instead of the usual black and white wires to each terminal it's black/white on one and blue on the other. :confused:
     

    Attached Files:

  2. ssshocked

    ssshocked

    2
    0
    Dec 1, 2012
    the blue and the white or black
    the white and the black are connected like they are one
    if you wire the white and black you will have short circuit
     
Ask a Question
Want to reply to this thread or ask your own question?
You'll need to choose a username for the site, which only take a couple of moments (here). After that, you can post your question and our members will help you out.
Similar Threads
  1. MOT

Loading...
Electronics Point Logo
Continue to site
Quote of the day

-