Connect with us

Monochrome display wiring

Discussion in 'General Electronics Discussion' started by JonnySC, Mar 10, 2016.

Scroll to continue with content
  1. JonnySC


    Mar 10, 2016
    Hello I'm wiring a monochrome 0.96 display to my uno it's a off brand (non adafruit) and the diagram I'm following only has the information for adafruit
    The pins on my screen are from left to right
    Gnd, vcc ,do ,d1 , Rst , dc , cs
    And you can look up the one for the adafruit one
    Basically the diagram says wire "data" pin to arduino a4
    "Clk" to pin a5
    And "Rst" pin to arduino pin 4
    My super long question is asking what pins on my display are the pins on the adafruit one
  2. shrtrnd


    Jan 15, 2010
    It'd help if we knew any information on the make of the display.
    Do you have a mfgr and/or model number?
    davenn likes this.
  3. davenn

    davenn Moderator

    Sep 5, 2009
    indeed ! :)

    and link to datasheet and any other useful info
Ask a Question
Want to reply to this thread or ask your own question?
You'll need to choose a username for the site, which only take a couple of moments (here). After that, you can post your question and our members will help you out.
Similar Threads
There are no similar threads yet.
Electronics Point Logo
Continue to site
Quote of the day