Connect with us

Monitor problem

Discussion in 'Electronic Repair' started by flocculus, Sep 26, 2007.

Scroll to continue with content
  1. flocculus

    flocculus Guest

    I have quite new LCD Samsung Syncmaster 720n monitor. Since about
    three days there's a problem. On very start of comuter it shows
    "Brightness" in center. It appears when it wants with no activity on
    my side. When I press Auto or Menu button on monitor in disappears for
    good or for only a second. Anyway it can drive crazy. Do You know
    where the problem may begin? Is it monitor failure, or graphic card
    failure? Or something else? Help
  2. Meat Plow

    Meat Plow Guest

    Likely problem with monitor on screen display. If it's "quite new" it's
    under warranty, have it repaired.
  3. flocculus

    flocculus Guest

  4. Chris Jones

    Chris Jones Guest

    Is there a button on the monitor that would bring up the "brightness" menu?
    Maybe that switch is faulty, or the casing is mechanically pressing on that
    switch and activating the menu. Try pressing gently on the casing around
    that switch and see if it causes or affects the problem.

Ask a Question
Want to reply to this thread or ask your own question?
You'll need to choose a username for the site, which only take a couple of moments (here). After that, you can post your question and our members will help you out.
Electronics Point Logo
Continue to site
Quote of the day