monitor hp pavillon mx70

[gooliver]

I've some problem with the VGA-cable for this monitor...
but for to remove the chassis of this monitor i've encountered
most difficulties... someone has service-manual with the specifications
on how to remove the plastic chassis?

thanx in advance!

 

[kel-fbs]

I've some problem with the VGA-cable for this monitor...
but for to remove the chassis of this monitor i've encountered
most difficulties... someone has service-manual with the specifications
on how to remove the plastic chassis?

thanx in advance!

If you look at the joint where the back and front of the monitor case
meet then you will see two very small regtangular holes on each side of
the monitor.
this is where the clips that hold the front and back of the case
together are located. You will need to find an object that can fit into
those holes to push the clips open. Put the monitor face down onto a
cusion or similar to avoid scratching the CRT then tilt the monitor to
one side by holding the back part of the case. Now when you press
something into the holes to push on the clips the weight of the CRT
will pull the front case away from the back case. Repeat this process
with the other side of the monitor.