Maker Pro
Maker Pro

Monitor disassembly

W

Wayne

Jan 1, 1970
0
I need help opening a Hewlett-Packard HP Ergo 1280 Monitor.
We found 2 screws at the back but still cannot get inside.

Any suggestions would be appreciated.
 
G

George S

Jan 1, 1970
0
I'm not familiar with the HP Ergo, but most newer monitor covers have just
two screws in the back or bottom. Then they have a couple of plastic latches
that hold the top part of the cover on. First look for hidden screws that
might be covered by small little plastic covers that pop out so you can
remove the screws.
If it just has the two screws and the latches, you have to pull out on the
back bottom part of the case while giving the top front part a good smack.
It should pop right off with a little persuasion.
 
Top