Connect with us

modulator output??

Discussion in 'Electronic Basics' started by Oxymel of Squill, Dec 31, 2005.

Scroll to continue with content
  1. Sorry, I'm a complete novice with all this

    Just bought a DVD/VCR to replace the old VCR and find I have faint lines of
    interference floating across the tv screen. Is this something you fix by
    changing the modulator output? Manual says you can change it from factory
    setting of 52, but doesn't say what it is, why you would need to or what to
    change it to

    Or is there something else I could do?


  2. Jasen Betts

    Jasen Betts Guest

    change it to something else and see if it helps.

    It's best to pick a chanel not near the chanel any local UHF transmitters
    or other sources of interferance,
    you could try cabling it into the AV input (or SCART etc) of your TV
    (if present) and use that means to view your videos...

Ask a Question
Want to reply to this thread or ask your own question?
You'll need to choose a username for the site, which only take a couple of moments (here). After that, you can post your question and our members will help you out.
Electronics Point Logo
Continue to site
Quote of the day