Connect with us

Modifying ATX PSU

Discussion in 'Power Electronics' started by justwhisen, Jun 4, 2012.

Scroll to continue with content
  1. justwhisen

    justwhisen

    3
    0
    Jun 4, 2012
    Hello, I have just recently built one of the "lab power supplies" from an atx unit. It does the job for the most part but I still need a few more volts than what it is currently capable of. My question is, is there a way I can get more out of it? I need 15 to 16 volts total, currently all I can get is a max of 12.
    This is the first electronic project I have ever really tried to take on I am and have always been a gear head. Thank you for your help.
     
  2. davenn

    davenn Moderator

    13,866
    1,958
    Sep 5, 2009
    hi there
    welcome to the forums :)

    I have moved your thread to a more appropriate section

    feel free to do just a plain intro thread in the introductions section :)

    cheers
    Dave
     
  3. CocaCola

    CocaCola

    3,635
    5
    Apr 7, 2012
    There have been a few posted here but they are all over Ebay as well as in a Google search...

    Google or Ebay "dc to dc adjustable boost module"

    They can be had for under $5
     
  4. justwhisen

    justwhisen

    3
    0
    Jun 4, 2012
    thank you both. I will make a proper introduction.
     
Ask a Question
Want to reply to this thread or ask your own question?
You'll need to choose a username for the site, which only take a couple of moments (here). After that, you can post your question and our members will help you out.
Electronics Point Logo
Continue to site
Quote of the day

-