Connect with us

Modifying a Huntron 2000

Discussion in 'Electronic Equipment' started by Uriah, Mar 8, 2007.

Scroll to continue with content
  1. Uriah

    Uriah Guest

    I was talking with the Huntron people and if they say that the old
    2000 doesn't do a good job on ICs. They told me you need a new model
    that goes down to 300mV to get passed the protection diode. I have a
    2000. Can I put a resistor in series with one of the leads to try and
    drop the output down to 300mV? As you know. The Huntron puts out 5,
    10,15, 40 VAC at 50, 400,2000 hz. You can choose the combo you want
    with buttons on the front. Can it be that simple? or do I risk
    damaging the unit buy doing something like this?

    Thanks
    Uriah
     
Ask a Question
Want to reply to this thread or ask your own question?
You'll need to choose a username for the site, which only take a couple of moments (here). After that, you can post your question and our members will help you out.
Electronics Point Logo
Continue to site
Quote of the day

-