Connect with us

Modification of Low-Noise RF Amp Design

Discussion in 'Radio and Wireless' started by Kilo Echo, Oct 16, 2016.

  1. Kilo Echo

    Kilo Echo

    5
    0
    Oct 16, 2016
    Greetings.
    I am fabricating the following circuit but have no use for the CTRL (BYPASS CONTROL) function.
    How should I delete this without affecting performance? Should the 1k Ohm resistor be installed and terminated? Or should it be eliminated? If eliminated, would the value of the next resistor change?
    Thank you.
    [​IMG]
     
  2. davenn

    davenn Moderator

    13,323
    1,769
    Sep 5, 2009
    hi
    welcome


    from the datasheet ......


    so it must be tied to one or the other

    Dave
     
  3. Kilo Echo

    Kilo Echo

    5
    0
    Oct 16, 2016
    Superb.
    Thank you, sir.
     
Ask a Question
Want to reply to this thread or ask your own question?
You'll need to choose a username for the site, which only take a couple of moments (here). After that, you can post your question and our members will help you out.
Electronics Point Logo
Continue to site
Quote of the day

-