Connect with us

MM5314 Clock Chip and B7971 Nixie Tubes

Discussion in 'General Electronics Discussion' started by Dkuriloff, Jan 26, 2010.

Scroll to continue with content
  1. Dkuriloff

    Dkuriloff

    6
    0
    Jan 18, 2010
    I have 6 Nixie tubes B7971 and a few MM5314 chips.

    I have 5 HV drivers DS8880 but I think this is a multiplexed design which can't use this.

    I would get the HV from rectified mains ~ 160 V for the HV side of the Nixies to make it as simple as possible.

    Does anyone know of a schematic to help me build this clock with this chip?

    How are the 7 segment Nixie tube displays decoded using? 74141 chips.

    Thanks for the help.

    Dan
     
  2. (*steve*)

    (*steve*) ¡sǝpodᴉʇuɐ ǝɥʇ ɹɐǝɥd Moderator

    25,473
    2,819
    Jan 21, 2010
Ask a Question
Want to reply to this thread or ask your own question?
You'll need to choose a username for the site, which only take a couple of moments (here). After that, you can post your question and our members will help you out.
Electronics Point Logo
Continue to site
Quote of the day

-