Connect with us

mm designation Jacks & Plugs ??

Discussion in 'General Electronics Discussion' started by Raul, Oct 20, 2012.

  1. Raul

    Raul

    33
    0
    Sep 25, 2012
    A 2.5mm coaxial center positive plug on a wall adaptor PS: does it require a barrel jack with a 2.5mm designation also?
     
    Last edited: Oct 20, 2012
  2. shrtrnd

    shrtrnd

    3,665
    453
    Jan 15, 2010
    There are several different sizes and depths.
    Take it into the store with you, and get the right sized mate.
     
  3. CocaCola

    CocaCola

    3,635
    4
    Apr 7, 2012
    This includes, outside diameter, inside diameter/pin diameter and depth...
     
  4. Raul

    Raul

    33
    0
    Sep 25, 2012
    Yah I'd do that, but there are no stores near me. I'd have to drive about 45 minutes each way for a $2.00 item.

    Any one remember when petrol was 12 and 13 cents a gallon?
    I do.
     
  5. CocaCola

    CocaCola

    3,635
    4
    Apr 7, 2012

    So get some calipers and get the measurements you need to get the proper jack...
     
  6. Raul

    Raul

    33
    0
    Sep 25, 2012

    Have to get the PS first. I was ordering things on the interwebs (all six of them).

    My last LED project came out smashingly thanks to you lot.
    here is the video I put up for the little girl to see the progress second floor is not powered up at that filming. It is now however.
     
Ask a Question
Want to reply to this thread or ask your own question?
You'll need to choose a username for the site, which only take a couple of moments (here). After that, you can post your question and our members will help you out.
Electronics Point Logo
Continue to site
Quote of the day

-