Connect with us

Mix mono to stereo

Discussion in 'General Electronics Discussion' started by electronoobz, Nov 17, 2012.

Scroll to continue with content
  1. electronoobz

    electronoobz

    226
    0
    Jan 14, 2012
    so i made a mp3 amp and i already have a small guitar amp..

    what i would like to do is:

    mix my guitar amp to my mp3 amp

    at first i thought of using a mixer but i want my mp3 to still have its stereo sound...

    Is there a way to do it??
     
  2. CocaCola

    CocaCola

    3,635
    5
    Apr 7, 2012
    You generally mix before amplification, mix the mono signal to both sides of the stereo signal and then amplify the stereo signal that not contains the mono signal...

    [​IMG]
     

    Attached Files:

    Last edited: Nov 17, 2012
  3. electronoobz

    electronoobz

    226
    0
    Jan 14, 2012
    thanks Coke hahahha...

    that's what i also think but for confirmation i asked it here...

    anyway could you help me using a 5 pin earphone jack??

    There is 3 on right and 2 on left.. Here's what i thought.. The sleeve goes to ground, the ring and tip to the ring and tip (what i mean is R and L) speakers and the other tip and ring bypass to the speakers (R and L) negative or is it ground???
     
Ask a Question
Want to reply to this thread or ask your own question?
You'll need to choose a username for the site, which only take a couple of moments (here). After that, you can post your question and our members will help you out.
Electronics Point Logo
Continue to site
Quote of the day

-