Connect with us

Mitsubishi VZ7 PIP Bypass?

Discussion in 'Electronic Repair' started by [email protected], Mar 10, 2006.

Scroll to continue with content
  1. Guest

    Hi, I posted a while ago about my Mits VS-50605 lacking Video on
    composite input/tuner, while everything else worked fine,
    it seems that the problem is somewhere in the PIP circuit, since the
    pip does not work either.
    After a bit of reading, there are bypass methods for the older pip
    boards, but nothing for the newer sets..

    Is there a way to bypass the pip on these newer mits tvs?

    Thanks,
    David F.
     
  2. The PIP on this set is not a discrete module and cannot be easily bypassed.

    The majority of problems with these sets have to do with coolant leaks or
    convergence outputs. A few bad caps have cuased some strange problems, but
    video and tuner issues are almost always continuity issues on the boards due
    to corrosion or handling.

    Leonard
     
Ask a Question
Want to reply to this thread or ask your own question?
You'll need to choose a username for the site, which only take a couple of moments (here). After that, you can post your question and our members will help you out.
Electronics Point Logo
Continue to site
Quote of the day

-