Connect with us

Mitsubishi TV only stays on for about 5 seconds and turns off

Discussion in 'Electronic Repair' started by [email protected], Aug 7, 2006.

Scroll to continue with content
  1. Guest

    I had this same issue a year and a half ago, the tv is only 3 years
    old. It is a 55 widescreen. When they came out to repair, all they did
    is reset something and run through a manyal convergence of the entire
    screen. Any ideas on what might be causing this, and how to reset the
    set again? I am at a loss here, and at this point am ready to fix and
    sell the darn thing.

    Any assistance would be great, my wife stays at home and babysits kids
    to having a tv is a necessity.

    Thanks again in advance.

    smhennes
     
  2. Tech Data

    Tech Data Guest

    Don't know of anything that can be 'reset' to make it fire. When the
    set shutsdown, on the front buttons press menu and input at the same
    time. The led should start to blink. Will probably be two blinks,
    pause, then count the blinks after the pause. Having this knowledge
    won't help you fix it but, could give the shop you talk to an idea what
    circuits have failed.

    www.techdata-kicksass.net
     
Ask a Question
Want to reply to this thread or ask your own question?
You'll need to choose a username for the site, which only take a couple of moments (here). After that, you can post your question and our members will help you out.
Electronics Point Logo
Continue to site
Quote of the day

-