Connect with us

Mitsubishi CK-3527R PIP problem; 930B500

Discussion in 'Electronic Repair' started by Bargs, Sep 13, 2004.

Scroll to continue with content
  1. Bargs

    Bargs Guest

    I have traced the problem with my Mitsubishi TV to the PIP board.
    It's badly damaged (cracked) and repair is questionable at best.

    Does anyone have a documented bypass scheme for PIP board 930B500.1?
    Any assistance would be greatly appreciated.
     
  2. BWL

    BWL Guest

    Try this:
    On the 11 pin connector, jumper pin 5 to pin 11 ; jumper pin 7 to pin 9. Use
    small electrolytics, say 1 mfd @ 50v, polarity unimportant (that's always
    worked for me).
     
Ask a Question
Want to reply to this thread or ask your own question?
You'll need to choose a username for the site, which only take a couple of moments (here). After that, you can post your question and our members will help you out.
Electronics Point Logo
Continue to site
Quote of the day

-