Connect with us

Mits VS5055 blows hot

Discussion in 'Electronic Repair' started by Steven Spence, Feb 25, 2004.

Scroll to continue with content
  1. I am working on a VS5055 projection that blows the Hot. I suspect the
    flyback but would like to know if I should check anything else. Also I
    need the part number for the flyback,, cannot read the number off of
    the tag and a source to buy it. If you have any ideas please help.
  2. John Del

    John Del Guest

    Subject: Mits VS5055 blows hot
    Scope the collector of the HOT, that's the best tester there is.

    John Del
    Wolcott, CT

    "I'm just trying to get into heaven, I'm not running for Jesus!"
    Homer Simpson

    (remove S for email reply)
  3. I just rechecked the model it is a vs5053
Ask a Question
Want to reply to this thread or ask your own question?
You'll need to choose a username for the site, which only take a couple of moments (here). After that, you can post your question and our members will help you out.
Electronics Point Logo
Continue to site
Quote of the day