Connect with us

mig welder rectifier

Discussion in 'Troubleshooting and Repair' started by robert931, May 6, 2013.

Scroll to continue with content
  1. robert931

    robert931

    4
    0
    May 6, 2013
    Hi there i have bought a mig welder for parts or repair with the intention of fixing it.

    it starts and feeds wire ok but it wont strike an arc. so i took a closer look at the rectifier and it seems the botom 8 diodes are burnt out / wires burnt off them.

    so my questions are.......
    1 what caused these diodes to fry will it do it again if i replace them
    2 the code on the diodes is t25 4 E9 and some are F9. can any one reccomend some replacements. I think they are the same as car alternator ones but not sure.

    thanks in advance robert
     
  2. (*steve*)

    (*steve*) ¡sǝpodᴉʇuɐ ǝɥʇ ɹɐǝɥd Moderator

    25,360
    2,756
    Jan 21, 2010
    A photo will tell us a lot more...
     
  3. robert931

    robert931

    4
    0
    May 6, 2013
    [​IMG]
     
  4. robert931

    robert931

    4
    0
    May 6, 2013
    how do you upload pics
     
  5. robert931

    robert931

    4
    0
    May 6, 2013
  6. davenn

    davenn Moderator

    13,557
    1,854
    Sep 5, 2009

    1) ... click on Go Advanced button below your text box
    it opens up another section below the text box with a button called Manage Attachments

    2) ... click on Manage Attachments button and a small window will open up so you can upload a file from your computer ...
    4) ... click on Browse button and go to the location on your puter where the file is
    5) ... select that file
    6) ... once its selected it will appear in the box to the left of the Browse button
    7) ... click the Upload button and the file name will appear under a heading of current attachments ( in that small window)

    Dave
     
Ask a Question
Want to reply to this thread or ask your own question?
You'll need to choose a username for the site, which only take a couple of moments (here). After that, you can post your question and our members will help you out.
Electronics Point Logo
Continue to site
Quote of the day

-