Maker Pro
Maker Pro

Midid/Effects Pedal

D

Dantanna

Jan 1, 1970
0
I have a digitech RP12 and I use it to control my Line6 amp. I do not use
the effects because they sound horrible with the amp. I noticed that the
pedal draws a wopping 2 amps! Is there a simple way to disconnect the
effect/preamp and yet keep the midi switching capability and thus reduce the
amp draw? There are 3 mosfets inside the thing and I am wondering if
disconnecting them or jumping them would do the trick. Any ideas?
 
Top