Maker Pro
Maker Pro

Microphone Advice please

Electric Al

Jan 16, 2014
85
Joined
Jan 16, 2014
Messages
85
Specifications
Element ...................................................... Dynamic
Directional type .................................Unidirectional
Frequency response..........................50~15,000 Hz
Impedance.................600 Ohms±30% (@1,000 Hz)
Sensitivity...... -72±3dB (0dB=1V/μbar, at 1,000 Hz)
Mic Output Connector............................... Bushing
Plug................................... ¼ Inch (6.35 mm) Phone
Cable dimensions ....12 ft × 0.19 in (3.7 m × 4 mm)
Mic dimensions...... 8.94 × 2.08 In (227 × 52.8 mm)
Weight......................... ......................10.7 oz (303 g)


Is this a decent microphone , and can it be used on a kids cheap Karaoke machine ?

Probably a dumb question !
 

shumifan50

Jan 16, 2014
579
Joined
Jan 16, 2014
Messages
579
used on a kids cheap Karaoke machine ?

I would not use a half decent mic for this purpose as it will get damaged. I would try and get a mic specifically designed for children(indestructable).
 

Electric Al

Jan 16, 2014
85
Joined
Jan 16, 2014
Messages
85
Thanks , You are probably right .



The mic I have is not an expensive one , it comes from Radio Shack .
 
Top