Maker Pro
Maker Pro

Micromaster LV48 software required.

S

Sam

Jan 1, 1970
0
It seems IceTech are no longer providing software for the LV48 on their
website and
I'm having a great deal of trouble trying to get it, lost the original CD
that came with
the programmer :(

Wondering if anybody can help ?

I've emailed Icetech and they have not replied.
 
M

Mike Harrison

Jan 1, 1970
0
It seems IceTech are no longer providing software for the LV48 on their
website and
I'm having a great deal of trouble trying to get it, lost the original CD
that came with
the programmer :(

Wondering if anybody can help ?

I have it - email me at [email protected]
 

laserdav

Aug 7, 2009
1
Joined
Aug 7, 2009
Messages
1
hi any chance of the lv48 software i have also lost the cd
many thanks
Dave
 

rowan.bradley

May 11, 2009
26
Joined
May 11, 2009
Messages
26
Also lost LV48 software

Hi,

I too have lost my CD and need to reinstall the Micromaster LV48 software on a new PC. Can one of you please help me out with this?

Many thanks - Rowan rowan(at)sylvester-bradley(dot)org
 

rowan.bradley

May 11, 2009
26
Joined
May 11, 2009
Messages
26
Micromaster LV48 software found - parallel cable problems

By seaching through the hard drives of some old PCs I found a copy of WinLV version 1.0.0241 dated 12-Nov-2003. Does any one know whetehr there's a more recent version than this?

I still can't get the LV48 to talk to the PC though. Does anyone know the correct specification for the cable? The manual says it's a "standard parallel port cable" but since it needs a male 25-way D on each end, this is different from any parallel port cable that I know. Does this need to be a straight through cable (i.e. pin 1 connected to pin1, pin 2 to pin 2 ... pin 25 to pin 25), or does it need to be an Interlink/Laplink cable, or something else?

Thanks - Rowan
 

prem

Mar 27, 2010
1
Joined
Mar 27, 2010
Messages
1
prem

Hi ,

Please advice if anyone out there have a WinLV version 1.0 software available.
My PC had crashed and i could not restore the file and i had also lost the
installation CD a long time ago.

Really appreciate the help
 

rowan.bradley

May 11, 2009
26
Joined
May 11, 2009
Messages
26
WinLV software

I now have two copies of WinLV version 1.0.0241. I believe one is for the 40-pin programmer and the other for the 48 pin. They may differ only in the libraries. Only the latter works on my MicroMaster LV48. I will send you one or both of these if you let me know where to send it.

Rowan
 

gasca

Jun 18, 2010
3
Joined
Jun 18, 2010
Messages
3
winlv

Hi i lost cd with winlv for micromaster lv49
It seems IceTech are no longer providing software for the LV48 on their
website and

please

if anybody can help ?
[email protected]
 

gasca

Jun 18, 2010
3
Joined
Jun 18, 2010
Messages
3
hi i my name is gasca, please help me I lost cd software with winlv for micromaster lv48 I do not software, I can not programmer.
 
Top