Connect with us

microcontroller over ethernet

Discussion in 'Electronic Design' started by addy, Sep 1, 2007.

  1. addy

    addy Guest

    hello the idea is to implement microcontroller over ethernet...
    can anyone help me getting some info about available microcontroller
    in this field ..
     
  2. Jamie

    Jamie Guest

    look at rabbit cores.
    http://www.rabbitsemiconductor.com/
     
  3. John Larkin

    John Larkin Guest

    This is interesting:

    http://www.gridconnect.com/dstnichips.html

    John
     
  4. Nico Coesel

    Nico Coesel Guest

    This site may get your nose pointing in the right direction:

    http://www.sics.se/~adam/uip/index.php/Main_Page
     
  5. Tom2000

    Tom2000 Guest

  6. Wim Lewis

    Wim Lewis Guest

    Motorola has an HC12 variant with an on-chip 10/100 MAC+PHY, the MC9S12NE64.
    You can get dev boards from technologicalarts.ca.

    Microchip has a SPI-interfaced ethernet MAC+PHY, the ENC28J60, which
    people often interface to a PIC. You can get dev boards all over,
    e.g. from Olimex.

    There's the venerable CS8900A, originally an ISA-bus ethernet
    controller, which is easy to interface to a microcontroller.
     
  7. Guest

Ask a Question
Want to reply to this thread or ask your own question?
You'll need to choose a username for the site, which only take a couple of moments (here). After that, you can post your question and our members will help you out.
Electronics Point Logo
Continue to site
Quote of the day

-