Connect with us

Mico 311 DVD recorder, mainly dead. Advice, pls?

Discussion in 'Electronic Repair' started by bungnut, Dec 14, 2005.

  1. bungnut

    bungnut Guest

    Evening, all.

    I picked this up out of a neighbour's dustbin. When I turn it on at the
    wall socket, the fan on the mech spins briefly, and the motor at the
    back of the mech deck lifts and then lowers the back of the deck and the
    laser flicks on, but nothing else happen - no spindle motor rotation, no
    display, no drawer open/close (even after I've manually opened the
    drawer and then turned the player back on). The voltages on the PSU
    board look OK, so I'm wondering if part of the problem might be a couple
    of bad channels on a motor-drive IC. Contact cleaner doesn't seem to
    have had any impact.

    Any help much appreciated.

    Cheers, Jon.
     
Ask a Question
Want to reply to this thread or ask your own question?
You'll need to choose a username for the site, which only take a couple of moments (here). After that, you can post your question and our members will help you out.
Electronics Point Logo
Continue to site
Quote of the day

-