Connect with us

measurements corp model 80 sig gen

Discussion in 'Electronic Equipment' started by Alfred Lorona, May 15, 2007.

Scroll to continue with content
  1. The am modulation in my model 80 quit. Which tubes are used in this circuit?
    The rf output is OK.

    tnx, AL
     
  2. Bill Janssen

    Bill Janssen Guest

    If the RF is OK and the voltage regulator is glowing that means the
    rectifier is OK. There can't be very many
    other tubes in that generator. The RF is a 955 tube and that is in the
    round can.

    It's been at least 20 years since I had mine open so I can't remember
    what tubes are in there.

    Bill K7NOM
     
Ask a Question
Want to reply to this thread or ask your own question?
You'll need to choose a username for the site, which only take a couple of moments (here). After that, you can post your question and our members will help you out.
Electronics Point Logo
Continue to site
Quote of the day

-