Connect with us

matlab simulink

Discussion in 'CAD' started by nivedita dasgupta, Mar 3, 2004.

Scroll to continue with content
  1. hello,
    please tell me how to develop a simulink model for a solar cell.thanx.

  2. You need to have a mathematical model of the solar cell. Then it's just a
    matter of interconnecting Simulink blocks to implement it.

  3. Tim Wescott

    Tim Wescott Guest

    That question would require about a month of coaching to answer, and if
    you're smart enough to develop a useful model in the first place you're
    smart enough to do it mostly on your own.

    To do any modelling of any thing in any tool, you need to learn how to model
    on paper, then you need to learn how your thing works so you can model it,
    then you need to learn how to use your tool to make a model.

    When you get to the point where you have a rough understanding of solar cell
    operation and Matlab/Simulink operation, you can come back with specific
    questions (like how the radiation angle affects efficiency, or some such).
  4. Chaos Master

    Chaos Master Guest

    nivedita dasgupta tava com a mulhegada quando eu cheguei gritando:
    You'd need to create a mathematical model for a solar cell and then "program" it
    in Simulink/Matlab.

    Chaos Master® - Porto Alegre, Brazil!
    IRC #XLinuxNews or #POA of , nick Wizard_of_Yendor .
    Powered by NetHack ( , Slackware 9.1 (Linux User #327480 - at
    CygWin, GnuWin32, and so on..
  5. kryon


    Aug 15, 2010
    hi can anyone tell me what sort of ph input can I give in complex phase shift block.And to give ZL(load) of 50 ohms should I just use a resistor of 50 ohms.
Ask a Question
Want to reply to this thread or ask your own question?
You'll need to choose a username for the site, which only take a couple of moments (here). After that, you can post your question and our members will help you out.
Electronics Point Logo
Continue to site
Quote of the day