Connect with us

Manual PM3585 logic analyzer

Discussion in 'Electronic Equipment' started by Anders Johansson, Sep 17, 2006.

Scroll to continue with content
  1. I'm looking for a pdf manual for the Philips PM3585 logic analyzer.
    Can anyone help?

    Anders J
     
  2. KC

    KC Guest

    Hi Anders,

    I am willing to scan a few pages (NOT the whole manual) for you, if
    that's any help.

    Or help you out with specific questions, if I can.

    Regards, Kees
     
  3. Kees,

    I'm, considering purchasing a used analyzer, and I don't know its specs.
    The specification pages, and main features would be very helpful, and I
    would
    every much appreciate if you could scan/send those.

    Is this a instrument you would reccomend?

    Thanks,
    Anders J
     
  4. KC

    KC Guest

    Anders,

    I use the PM3585 since it came on the market round 1990. I used it for
    my job for years (at Philips) and now it's sitting on my workbench at
    home.

    Would i recommend it ? It depend on want you want to do and what you
    want to pay. I used it for several microprocessors and computers for my
    job and I use it at home as a timing analyzer and to debug my 80C552
    projects.

    Make sure that you buy it with the original POD cables (max.6) and with
    the active probe ends (16x for every POD)

    Software is no problem everything you need comes from a floppy disk.

    I will mail you the scan result later this week.

    If you need more information just let me know.

    Kees
     
Ask a Question
Want to reply to this thread or ask your own question?
You'll need to choose a username for the site, which only take a couple of moments (here). After that, you can post your question and our members will help you out.
Electronics Point Logo
Continue to site
Quote of the day

-