Connect with us

Manual or datasheet for old ECG equipment from HP

Discussion in 'Electronic Design' started by Joerg, Apr 3, 2013.

Scroll to continue with content
  1. Joerg

    Joerg Guest

    Hello All,

    Does anyone know where to obtain data for this old ECG stuff:

    HP console: 78901A
    ECG: 78213C Neonatal Monitor
    Oscilloscope Monitor :78304A

    Not the same but looks similar:

    Reason is I'll have to interface to that during a test. I was told the
    ECG output signal which I'll need comes out on a BNC and is 1mVpp in
    amplitude. Doesn't sound correct, but what is it?

    Or does anyone remember from operating these? I only need ballpark
    numbers like 100mV or 1V. The connectors seem to be 1/4" headphone jacks
    in the back but hard to see.
  2. Bill Sloman

    Bill Sloman Guest

    It might be worth digging around in the Hewlett-Packard Journal.

    This issue describes a more recent patient monitoring system

    Searching on ECG gets a lot of hits Here's one of them
  3. Joerg

    Joerg Guest

    Thanks. Couldn't find any of them, also not on the HP site.

    Wow, that one is a real blast from the past :)
Ask a Question
Want to reply to this thread or ask your own question?
You'll need to choose a username for the site, which only take a couple of moments (here). After that, you can post your question and our members will help you out.
Electronics Point Logo
Continue to site
Quote of the day