Connect with us

Manual For a Power Ten 3350D

Discussion in 'Electronic Design' started by [email protected], Sep 26, 2007.

Scroll to continue with content
  1. Guest

    Hello

    I have a Power Ten 3350D-10100 Model DC power supply. Currently the
    internal jumpers are configured for a 240 volt input, I would like to
    change them to make the supply into a 120 volt input supply. I
    believe that it is how it was originally configured as you can see
    where some of the jumpers have been removed. Other than being able to
    tell that it is essentially a voltage doubler circuit with diodes I
    would prefer to confer from some sort of manufacturer document on this
    issue. Is there anybody out there with information I need. Or for
    that matter if somebody knows if Power Ten Inc is still around?

    Andrew
     
  2. Steve

    Steve Guest

    Power Ten is no longer around. I think they were bought out by Elgar. Their
    power supplies were very reliable, but not always the best regulation.
     
Ask a Question
Want to reply to this thread or ask your own question?
You'll need to choose a username for the site, which only take a couple of moments (here). After that, you can post your question and our members will help you out.
Electronics Point Logo
Continue to site
Quote of the day

-