Connect with us

Magnavox Projection

Discussion in 'Electronic Repair' started by Vince, Dec 30, 2004.

Scroll to continue with content
  1. Vince

    Vince Guest

    Hi!
    I have a Magnavox Projection.
    MdlRM8564A103
    ChassisPTV386A001
    There is no response with the controls except for the color control,
    there is very little picture quality, it is almost like there is no vedeo,
    If anyone has any idea where I should start, i would sure appriciate any
    help I can get.
    Thank you
    Vince
     
  2. BWL

    BWL Guest

    probably needs to have the fluid changed in the CRT's for a start; if the
    fluid's clear, you may have a bad DAC, unsure about Mag part#, but generic # is
    TDA8444 (on chip)
     
Ask a Question
Want to reply to this thread or ask your own question?
You'll need to choose a username for the site, which only take a couple of moments (here). After that, you can post your question and our members will help you out.
Electronics Point Logo
Continue to site
Quote of the day

-