Maker Pro
Maker Pro

mag. fp5240

4

458

Jan 1, 1970
0
have mag fp5240w104 that blows hot and r961 on start-up any ideas? thanks
 
J

Jerry G.

Jan 1, 1970
0
Check the ESR on all the associated caps. Make sure that the horiz drive
is working correctly, and make very sure that the flyback has no shorted
turns. Many times, in TV sets, and monitors, I have had a bad flyback
cause this.

--

Jerry G.
======

have mag fp5240w104 that blows hot and r961 on start-up any ideas?
thanks
 
E

Eric

Jan 1, 1970
0
Also check if B+ is too high


Check the ESR on all the associated caps. Make sure that the horiz drive
is working correctly, and make very sure that the flyback has no shorted
turns. Many times, in TV sets, and monitors, I have had a bad flyback
cause this.

--

Jerry G.
======

..com...
have mag fp5240w104 that blows hot and r961 on start-up any ideas?
thanks
 
Top