Connect with us

LTSPICE to HSPICE conversion

Reply to Thread

Discussion in 'General Electronics Discussion' started by Samsung, Oct 11, 2014.

Scroll to continue with content
  1. Oct 11, 2014 #1
    Samsung

    Samsung

    1
    0
    Oct 11, 2014
    Hi everyone
    I am running a project that requires a rather large scale VLSI circuit design with hspice using CMOS 0.35 micron technology .l model file. I was wondering if there would be :
    1- Any ways I could import the .l hspice library into ltspice hence could run the MOSFETS with the correct specs
    2- Any ways I could make a circuit schematic using ltspice and could export the netlist to hspice format or use hspice to read and simulate the ltspice generated netlist.


    regards,
    Sam
     
  2. Oct 12, 2014 #2
    Harald Kapp

    Harald Kapp Moderator Moderator

    11,660
    2,696
    Nov 17, 2011
    Welcome to this forum.

    1) As long as the library you use does not include HSPicespecific statements that LTSpice wouldn't recognize, you can use the HSPice libraries.
    2) In LTSpice click "view" -> "Spice netlist". LTSPice will create a text file xxx.net (xxx is the name of your schematc aka xxx.asc file) in the same directory where the .asc file is located. This .net file is a standard ASCII Spice netlist. You should be able to use it in HSPice.

    See also the ressource section of this forum for more information on LTSpice.
     
Ask a Question
Want to reply to this thread or ask your own question?
You'll need to choose a username for the site, which only take a couple of moments (here). After that, you can post your question and our members will help you out.
Similar Threads

  1. LTspice to Hspice problem

  2. Hspice

  3. Frequency to Voltage Conversion

  4. RGBs to composite conversion

  5. volume to liter conversion

  6. Toob to transistor conversion

  7. Schematic to reality conversion

  8. ethernet to serial conversion

Loading...
Electronics Point Logo
Continue to site
Quote of the day

“”

-