Connect with us

LTspice Question

Discussion in 'CAD' started by Jim Thompson, Feb 21, 2008.

Scroll to continue with content
  1. Jim Thompson

    Jim Thompson Guest

    LTspice Question:

    I have a client using LTspice.

    What is the best way for him to import a design from PSpice?

    Would it work if I make my schematic into a SUBCKT that includes the
    device models within the subcircuit?

    ...Jim Thompson
     
  2. Don Bowey

    Don Bowey Guest


    Hire a consultant to help you, cheapskate.
     
  3. John Larkin

    John Larkin Guest

    You could say that to everybody who posts here.

    John
     
  4. Jim Thompson

    Jim Thompson Guest

    Don Bowey sucks his own dick.

    ...Jim Thompson
     

  5. Hello Jim,

    Yes this may be OK. LTspice is very compatible to PSPICE
    except for digital devices.
    Why making a subcircuit? Just run the netlist as it is.

    Best regards,
    Helmut
     
  6. legg

    legg Guest

    I suspect that at the level of simulation intended, the digital
    devices ARE analog.

    RL
     
  7. Jim Thompson

    Jim Thompson Guest

    ALL digital is ANALOG ;-)

    ...Jim Thompson
     
  8. Joerg

    Joerg Guest

    The SW manager at my first employer said that since Max Planck all
    analog is digital ;-)
     
  9. qrk

    qrk Guest

    Give them the .CIR and .NET files. The .CIR file calls the .NET file.
    LTspice will run the .CIR file without problem if you don't have any
    goofy digital blocks.

    Be sure to give friendly net names to all the points they want to
    probe. Sucks having to search thru the net list for names.
     
  10. Jim Thompson

    Jim Thompson Guest

    That's what I sent them while I think about it, and I just got an
    E-mail that they already have it running ;-)

    ...Jim Thompson
     
  11. Whaddaya, jealous? ;-)

    Cheers!
    Rich
     
  12. John Fields

    John Fields Guest

    ---
    Indeed.

    My first physics professor, who used to refer to a uniform bar as a
    "military saloon", turned us on to the concept of the universe being
    made not of jello, but of grits.
     
  13. ehsjr

    ehsjr Guest

    Analog is digital, and Planck is constant. Go figure. :)

    Ed
     
  14. Joerg

    Joerg Guest

    Digital units all have the tendency to be quantified and constant. Until
    the not so digital stuff strikes. Ground bounce, ringing, crosstalk,
    EMI, magnetic coupling, supply glitches, the sales guy answering his
    cell phone and so on. Then they call on us analog dudes again ;-)
     
  15. Tim Williams

    Tim Williams Guest

    I'm going down to the h bar and grill.

    Tim
     
  16. Chuck Harris

    Chuck Harris Guest

    Yes, but if you can figure out where it is, you will never
    get there in time.

    -Chuck
     
  17. John Fields

    John Fields Guest

     
  18. Rich Grise

    Rich Grise Guest

     
  19. JeffM

    JeffM Guest

  20. Tim Williams

    Tim Williams Guest

    I'll
    ____
    | \ \
    | | >------
    _______| /____/

    that.

    Tim
     
Ask a Question
Want to reply to this thread or ask your own question?
You'll need to choose a username for the site, which only take a couple of moments (here). After that, you can post your question and our members will help you out.
Electronics Point Logo
Continue to site
Quote of the day

-