Connect with us

LTSpice - How to Copy a Circuit To Another?

Discussion in 'CAD' started by Gary Brown, Jun 13, 2005.

Scroll to continue with content
  1. Gary Brown

    Gary Brown Guest


    How do you copy from one circuit to another in LTSpice? I have resumed
    using this tool after a layoff. There is a trick to doing this that bit me
    before but I don't remember it.


  2. Hello Gary,

    Here is the "trick".

    Make the source schematic window active.

    Click on "Copy" in the tool bar.

    Draw a rectangle around the circuit area you want to copy.

    Activate the destination schematic window.

    Click on "Paste" in the tool bar.

    Move the cursor into the destination window. Now you see the
    outline of the copied area at the cursor. Click the left mouse
    button where you want place it.

    Best regards,
Ask a Question
Want to reply to this thread or ask your own question?
You'll need to choose a username for the site, which only take a couple of moments (here). After that, you can post your question and our members will help you out.
Electronics Point Logo
Continue to site
Quote of the day