Connect with us

Lowry C-500 organ pedals inoperative

Discussion in 'General Electronics Discussion' started by LML, Sep 7, 2019.

  1. LML

    LML

    1
    0
    Sep 7, 2019
    I have a C-500 Lowry Organ where everything works except the pedals.
    None of them work no matter what stops are turned on.
    I've been checking the pedal latch board (added on later models) and I am getting low voltages
    at test points. IC voltage should be 13+ and it's 9.7+v as an example.

    Does anyone have any ideas to help with this problem. I would appreciate a reply.
    Thank you
    LML
     
  2. Alec_t

    Alec_t

    2,699
    715
    Jul 7, 2015
    Welcome to EP!
    Any chance you could post a schematic (or at least an owner's manual)?
     
  3. brevor

    brevor

    87
    16
    Apr 9, 2013
    Have you checked that you have +24V on the pedal switch contacts?
    I used to work at Lowrey many years ago when the C-500 was in production.
     
Ask a Question
Want to reply to this thread or ask your own question?
You'll need to choose a username for the site, which only take a couple of moments (here). After that, you can post your question and our members will help you out.
Electronics Point Logo
Continue to site
Quote of the day

-