Connect with us

Low Pass Filter For Ground And Neutral

Discussion in 'Power Electronics' started by akashjoseph1997, Jul 12, 2018.

  1. akashjoseph1997

    akashjoseph1997

    1
    0
    Jul 12, 2018
    Why did low pass filter used b/w neutral and ground connection.
    Since neutral has no charge ,then is it required?

    is neutral and ground has 0v,Can we connect capacitor c25 to neutral instead of connected to ground

    I am only beginner in this electronics pls help me
    te voltage.PNG
     
  2. Alec_t

    Alec_t

    2,546
    672
    Jul 7, 2015
    Welcome to EP!
    You can't guarantee that there will be 0V between Neutral and Gnd. Although they may be connected together at some point in a mains distribution system, wiring from that point on can pick up all sorts of voltages from spurious ground currents and interference.
    AGND is a reference point for your circuit.
     
  3. Minder

    Minder

    2,727
    566
    Apr 24, 2015
    The fact is says 'AGND' I assume this is analogue ground not Earth Ground.
    This sort of high lights the problem where the term GND is used across the board, whether earth ground or not.
    It is not allowed in most jurisdictions to connect neutral and earth ground anywhere but at the service or re-established local supply source.
    M.
     

    Attached Files:

    Last edited: Jul 12, 2018
Ask a Question

Want to reply to this thread or ask your own question?

You'll need to choose a username for the site, which only take a couple of moments (here). After that, you can post your question and our members will help you out.
Electronics Point Logo
Continue to site
Quote of the day

-