Connect with us

Low cap PMOS

Discussion in 'Electronic Design' started by Fred Bartoli, Dec 8, 2012.

Scroll to continue with content
  1. Fred Bartoli

    Fred Bartoli Guest

    I think it was J.L. who gave a few weeks/months ago the reference of a
    nice small PMOS with IIRC half the parasitics of a BSS84, but I can't
    find it...

    John, can you give it again?

  2. Joerg

    Joerg Guest

  3. Fred Bartoli

    Fred Bartoli Guest

  4. Joerg

    Joerg Guest

    That's on account of the built-in gate-source zener. You'll want a FET
    without that. Slim pickens, as they say over here, not too much to pick

    If there is the slightest chance to swing this circuit to N-channel then
    by all means I'd do it.
  5. I have used FDV302P in some cryogenic work,
    it also has pretty low Ciss.

  6. Joerg

    Joerg Guest

    Ooops, sorry, I read gate capacitance but that's not what you meant.
  7. Fred Bartoli

    Fred Bartoli Guest

    Joerg a écrit :
    Ah, I wondered what the zener had to do with the gate resistance :)
Ask a Question
Want to reply to this thread or ask your own question?
You'll need to choose a username for the site, which only take a couple of moments (here). After that, you can post your question and our members will help you out.
Electronics Point Logo
Continue to site
Quote of the day