Connect with us


Discussion in 'Electronic Repair' started by Jim, Sep 15, 2003.

Scroll to continue with content
  1. Jim

    Jim Guest

    We lost the color on our Zenith (model #B25A02Z) suddenly.
    The set is about 5 years old.
    Is there possibly a simple fix??
    Would appreciate any thoughts/opinions on this!!


  2. Sofie

    Sofie Guest

    The only way you might obtain some "simple fix" ideas is if you can perform
    some basic technical troubleshooting with the proper test equipment.....
    DMM, Oscilloscope, etc.... and post the results..... then, of course, if
    you could do that you would have already done the simple fix and you would
    not be posting your question in the first place..
    At the very least you should take your television to a service shop for a
    repair cost estimate so you can make an intelligent repair decision with
    facts instead of internet guesses.
  3. Bill Bolle

    Bill Bolle Guest

    I have an old Zenith that sometimes looses color and the picture gets
    kind of grainy when we have a power failure. Look through your "on
    screen" menus and see if there is something called "reset" or "master
    reset". If there is, try activating this and it will set the TV back
    to factory defaults. You may not have this feature but it's worth a

Ask a Question
Want to reply to this thread or ask your own question?
You'll need to choose a username for the site, which only take a couple of moments (here). After that, you can post your question and our members will help you out.
Electronics Point Logo
Continue to site
Quote of the day