Connect with us

Looking for tape-path alignment mirror cassette

Discussion in 'Electronic Repair' started by Adrian Glaubitz, Aug 23, 2007.

Scroll to continue with content
  1. Hello,

    I'm looking for an tape-path alignment mirror-cassette to align
    the tape-path of my AKAI GX-F71 cassette-deck. Anynone knows a
    source for these nowadays or has one and is willing to sell ?

    There is one shown under the following URL (second tape):

    http://mb.abovenet.de/Project_C-90/tapes_konig.htm


    Best Regards,

    Adrian
     
  2. Arfa Daily

    Arfa Daily Guest

    I have the Konig one and if it is still available, I would thoroughly
    recommend it. It does exactly what it says on the can, as they say. In fact
    I have the full set of Konig test tapes including speed strobe, torque
    meter, azimuth, flutter, 0dB etc, and they are all very good, with the
    recorded levels correct within a decimal or so of the value printed on the
    tape.

    Arfa
     
Ask a Question
Want to reply to this thread or ask your own question?
You'll need to choose a username for the site, which only take a couple of moments (here). After that, you can post your question and our members will help you out.
Electronics Point Logo
Continue to site
Quote of the day

-