Connect with us

looking for schematic and hook up data for Ultra ult-vx700 ATX ps

Discussion in 'Datasheets, Manuals and Component Identification' started by jon5500, Nov 20, 2020 at 11:03 PM.

Scroll to continue with content
  1. jon5500

    jon5500

    17
    0
    Oct 31, 2020
    I have a Ultra ult-vx700 power supply that I want to use in another application besides PC's. Problem is that there are not color coded wires, everything is black wiring or just plugs. I need to know the designations of the 12, 5, 3 V lines. Also, whether or not it can operate without being hooked up to a load and, if not, I will place a resistor across the 5V line and ground. Finally, as in a normal PC supply with green color to ground turning it on, how about with this one? I've googled all this and don't come up with anything so far. Thanks in advance!
     
  2. ramussons

    ramussons

    367
    71
    Jun 10, 2014
    You have an option of going by the pin numbers on the 20 (or 24 ) pin Molex connectors.

    Google for "ATX PSU Connectors"

    Better to have a minimum load of an Amp or 2 on the 5 Volts line.
     
    Martaine2005 likes this.
  3. bertus

    bertus Moderator

    1,150
    436
    Nov 8, 2019
    Martaine2005 likes this.
  4. jon5500

    jon5500

    17
    0
    Oct 31, 2020
    Thank you both, just what was needed. I definitely can proceed from there!
     
  5. Martaine2005

    Martaine2005

    2,967
    817
    May 12, 2015
    As a side note, you can buy ( lazily) ATX 20 and 24 pin break out boards. Between £3 and £15.

    Martin
     
Ask a Question
Want to reply to this thread or ask your own question?
You'll need to choose a username for the site, which only take a couple of moments (here). After that, you can post your question and our members will help you out.
Electronics Point Logo
Continue to site
Quote of the day

-