Connect with us

Looking for RF Driver design or designer

Discussion in 'General Electronics' started by LASERDOUG, Aug 7, 2004.

  1. LASERDOUG

    LASERDOUG Guest

    Hi,

    I'm looking for an individual or company capable of doing a state of the art
    design for an RF Driver capable of driving an acousto optic Q Switch. There are
    a few designs on the market, but most are really old designs and we are looking
    to manufacture our own device so we can control delivery/quality. Basic driver
    specs are;

    24, 27.12, 40.68, 68 Mhz (not all in one design, separate drivers)
    50-100 watts output adjustable (I also want a design variable from 10-20 watts)
    50 ohm output impedence
    modulation from 200 hz to 50 khz.
    pulse killer circuity
    internal modulator, but external capable
    on-off time adjustable between 5-20 micro seconds
    fast rise/fall time
    120-220VAC, 50-60 hz.
    thermal shutdown
    VSWR & Over power shut down adjustable

    We are looking for either a company willing to build this specifically for us
    or an individual capable of just doing the design, either then entire packaged
    device, or just the PC Board. We could design the mechanics of the box, power
    supply, etc.

    Are you capable, or do you know of anyone able to do this kind of work? I would
    appreciate any input.

    Thanks!

    Doug
     
Ask a Question
Want to reply to this thread or ask your own question?
You'll need to choose a username for the site, which only take a couple of moments (here). After that, you can post your question and our members will help you out.
Electronics Point Logo
Continue to site
Quote of the day

-