Connect with us

Looking for potentiometers in the UK

Discussion in 'Electronic Components' started by Tony Kennedy, Sep 5, 2003.

Scroll to continue with content
  1. Tony Kennedy

    Tony Kennedy Guest

    Hello,

    Hopefully this is the correct group to post to.

    I am fixing an old mixing desk, and need some replacement pots. The old ones
    are shown in the following pic
    http://homepage.ntlworld.com/kennedylanduk/pots.jpg

    I can find similar looking ones in the UK at Farnell and RS, but not at the
    values I need.
    3 x 500k Lin Dual
    1 x 20k Log dual
    2 x 10k Lin single
    1 x 50k lin single

    Does anyone know where I can get similar ones in the UK? I hvae tried
    everywhere I can think of. They are for a Seck mixer if that helps at all.

    Thanks in advance for any help,

    Tony.
     
  2. Eric

    Eric Guest

    which type of pot to which value?
    You should be able to get all the values to the one on the left, even of
    you have to cut the shaft off. the other two like a bit tricky.

    : Hello,
    :
    : Hopefully this is the correct group to post to.
    :
    : I am fixing an old mixing desk, and need some replacement pots. The old
    ones
    : are shown in the following pic
    : http://homepage.ntlworld.com/kennedylanduk/pots.jpg
    :
    : I can find similar looking ones in the UK at Farnell and RS, but not at
    the
    : values I need.
    : 3 x 500k Lin Dual
    : 1 x 20k Log dual
    : 2 x 10k Lin single
    : 1 x 50k lin single
    :
    : Does anyone know where I can get similar ones in the UK? I hvae tried
    : everywhere I can think of. They are for a Seck mixer if that helps at all.
    :
    : Thanks in advance for any help,
    :
    : Tony.
    :
    :
     
  3. crooksie

    crooksie Guest

    Hi tony
    i have come across this one myself, try
    http://www.gbaudio.co.uk/data/seck6.htm
    bob
     
  4. Tony Kennedy

    Tony Kennedy Guest

    Hi tony
    Thanks for that. The mixer in the pic is almost identical to mine (I have
    the 12 channel version).

    I have e-mailed them, hopefully they can help.

    Tony.
     
Ask a Question
Want to reply to this thread or ask your own question?
You'll need to choose a username for the site, which only take a couple of moments (here). After that, you can post your question and our members will help you out.
Electronics Point Logo
Continue to site
Quote of the day

-