Connect with us

Looking for LCD Adapter/Converter

Discussion in 'LEDs and Optoelectronics' started by Mipy, Jan 29, 2019.

  1. Mipy

    Mipy

    2
    0
    Jan 29, 2019
    I recently found an old car DVD player lying by the side of the road, I took it apart and now have an 8" CCFL LCD panel which I'd like to use with my raspberry pi. The only issue is that it has a 26 pin connector and I cannot find any LCD to HDMI adapters that would work.
    Does anybody know if such a product exists or how I could make one and what I would need to do it?
     
  2. HellasTechn

    HellasTechn

    1,407
    195
    Apr 14, 2013
    I am not sure what you want is possible. For example in TV's there are special boards (Tcon boards) that drive the LCD's.
    Ive never heard of direct connection of HDMI-LCD.
     
    davenn likes this.
  3. Mipy

    Mipy

    2
    0
    Jan 29, 2019
    Sorry, I don't think I was clear enough. I meant a board that drives the lcd using hdmi as the input. I have found many of these but none of them support a 26 pin ribbon connector.
     
  4. HellasTechn

    HellasTechn

    1,407
    195
    Apr 14, 2013
    Im sorry, i do not know...
     
Ask a Question
Want to reply to this thread or ask your own question?
You'll need to choose a username for the site, which only take a couple of moments (here). After that, you can post your question and our members will help you out.
Electronics Point Logo
Continue to site
Quote of the day

-