Maker Pro
Maker Pro

Looking for J-cell battery contacts

Hi All,
I am designing a circuit to be powered by a J-cell (the 6V batteries
once popular with cameras, now used in medical devices - like this:
http://tinyurl.com/8ayw5 ). The cell will lay flat against a PCB, so I
need some kind of PCB-mounted spring contacts for the J-cell. I am
coming up empty from the usual sources - digikey, etc. The closest I've
found are springs for AA batteries, which may work.

But I was wondering if someone knew of a supplier of spring contacts
specifically for J-cells?

Thanks - Steven
 
P

PeteS

Jan 1, 1970
0
I can't say whether the contacts are specifically for J-Cell, but AVX
and ITT-Cannon have excellent lines of spring contacts designed for the
mobile market (hand held in particular).

I use a dual row stacker that might be suitable

58-9158-030-000-037S from Elco (part of AVX).

As always, check the stuff for your own application.

I prefer AVX/Elco as the support seems to be much better than
ITT-Cannon (it's almost impossible to get them to answer calls - one
wonders if they actually want to sell anything).

Cheers

PeteS
 
Top