Connect with us

Looking for a proportional flow valve that doesn't break the bank

Discussion in 'Datasheets, Manuals and Component Identification' started by Odimachkie, Oct 4, 2012.

  1. Odimachkie

    Odimachkie

    1
    0
    Oct 4, 2012
    Im working on a fountain project that will need 8 proportional flow valves. I'm working with tap water, so pressure and temperature are not really an issue.
    Im planning on controlling the valves with pwm from an MC, stepped up through an isolation circuit of some sort. 12vdc would be best, but 24v is available if I really need it.
    does anyone either know of a valve or know a good place to look? I'm still under budget, but I don't think I can spend anymore than 20-25 bucks each at this point.
     
Ask a Question
Want to reply to this thread or ask your own question?
You'll need to choose a username for the site, which only take a couple of moments (here). After that, you can post your question and our members will help you out.
Similar Threads
There are no similar threads yet.
Loading...
Electronics Point Logo
Continue to site
Quote of the day

-