Maker Pro
Maker Pro

looking for a 10 bit transceiver with latches?

24Volts

Mar 21, 2010
164
Joined
Mar 21, 2010
Messages
164
Hello,

I have found this part at:

http://www.ti.com/lit/ds/sccs035a/sccs035a.pdf

which is a unidirectional 10 bit latch with 3 state outputs employing two enables of which I require in my design.

I was wondering though, is there any parts out there that have the same thing but bidirectional?

I have been looking everywhere on the Internet for a few days and can't seem to find anything :mad:

If anyone has ever used such a part I would really appreciate the part number :)

PS probably a part with such functionality would make
No sense ... I guess is why I can't find it. :rolleyes:

Thank you all
 
Last edited:

(*steve*)

¡sǝpodᴉʇuɐ ǝɥʇ ɹɐǝɥd
Moderator
Jan 21, 2010
25,510
Joined
Jan 21, 2010
Messages
25,510
I can only suggest an 8 bit part. 74HC646

It makes perfect sense -- it's a bus transceiver with latches.
 

24Volts

Mar 21, 2010
164
Joined
Mar 21, 2010
Messages
164
Yeah thanks Steve I appreciate your reply.

however I really do need the 10 bits....

I have been looking all over the place and could not
Find it.

I just think I will get myself a 2.00$ CPLD and
Do it myself .

Cheers and thanks for replying
 

(*steve*)

¡sǝpodᴉʇuɐ ǝɥʇ ɹɐǝɥd
Moderator
Jan 21, 2010
25,510
Joined
Jan 21, 2010
Messages
25,510
If you were to look hard enough, you'd probably find the same thing but 16 bits wide, but it would probably cost more than $2 in small quantities and be in a nasty package :)

Like this.
 
Top