Connect with us

lmd18201

Discussion in 'General Electronics Discussion' started by Jones2, Dec 17, 2012.

Scroll to continue with content
  1. Jones2

    Jones2

    1
    0
    Dec 17, 2012
    Hello,

    I'm having a problem with my lmd18201, problems is it won't get into the breadboard and I broke some of it's pins.

    I have two questions:

    1- Does the lmd18201 get into the breadboard directly ?!

    2- Can the broken pins be fixed ?

    Thanks.
     
  2. (*steve*)

    (*steve*) ¡sǝpodᴉʇuɐ ǝɥʇ ɹɐǝɥd Moderator

    25,448
    2,809
    Jan 21, 2010
    1) if the pins have 0.1 inch spacing then "probably". You may find it easier if you use some needle nose pliers to twist each leg 90 degrees so that the pin slips into the breadboard more easily.

    2) it depends where you broke it. If you're lucky you can solder a wire to it. If not,...
     
Ask a Question
Want to reply to this thread or ask your own question?
You'll need to choose a username for the site, which only take a couple of moments (here). After that, you can post your question and our members will help you out.
Similar Threads
There are no similar threads yet.
Loading...
Electronics Point Logo
Continue to site
Quote of the day

-