Connect with us

LM317KTE? (Texas Instruments).

Discussion in 'Electronic Components' started by Lostgallifreyan, Dec 1, 2006.

Scroll to continue with content
  1. The LM317KTE is like the D2-pak, but only 2mm thick and still able to
    supply over 1.5 amps, which is why I want some. Digi-key have them, but not
    in stock, and to get a cost effective price I'd have to buy 500 of them!

    It doesn't help that they're not recommended for new designs, are
    discontinued by Texas Instruments. Or does it? Maybe someone has some and
    might sell me some? Payment would ideally be made by Paypal. Quantity
    wanted can be variable, so long as the quantity, nor the cost, is too high.

    An alternative I can use is a smaller D-pak device that will supply 1.5
    amps or more. I don't think there is one, but I could easily be wrong. The
    SOT-223 types won't do, as I can't mount them to a chassis or panel.
  2. legg

    legg Guest

    There is stock of fixed voltage regulators in that package under TL780
    part number.

  3. LM317 isn't a fixed voltage regulator. If someone wants cheese, why offer
  4. legg

    legg Guest

    Your letch seemed to be for the 2mm physical package. If fit is your
    problem, this is a solution.

    Your problem seemed to be availability. If availability is your
    problem, this is a solution.

    If you've never used a fixed regulator to produce a different voltage,
    perhaps you could use some more advice.

    Otherwise, feel free to put your finger back where it normally

  5. Are you a professional asshole, or is it just a hobby? The LM317 is a far
    better regulator than the fixed types. Don't presume you know more about
    someone elses problem. Just answer the question, or shut up.
  6. legg

    legg Guest


Ask a Question
Want to reply to this thread or ask your own question?
You'll need to choose a username for the site, which only take a couple of moments (here). After that, you can post your question and our members will help you out.
Electronics Point Logo
Continue to site
Quote of the day