Connect with us

Linytron Sharp TV channel changing issues

Discussion in 'Electronic Repair' started by bumbie, Aug 21, 2004.

Scroll to continue with content
  1. bumbie

    bumbie Guest

    I have a Sharp Linytron color TV from the 80s (not sure of the model) and
    it works great except for 2 things:

    - when I turn it on, it is on the last channel I watched but when I press
    channel up or down, it defaults to channel 65. If I press the Memory
    button then I can change the channels normally. It started doing this
    recently and I think I may have hit some button combo on the remote that
    set it but now I don't know how to undo it.

    - I can't get it to go to a channel above 65 except for a few channels in
    the 90s. My TV Guide channel through cable is 69 so it would be nice to be
    able to get to that channel! Even pressing 6 then 9 does not work--it
    goes to 65.

    I don't have the manual anymore so any help is appreciated!
     
  2. Kim

    Kim Guest

    Probably a button stuck down on the remote
    Kim
     
  3. Art

    Art Guest

    Some of the early generation cable mode tuners only went up to a certain
    channel number and stopped there.
     
Ask a Question
Want to reply to this thread or ask your own question?
You'll need to choose a username for the site, which only take a couple of moments (here). After that, you can post your question and our members will help you out.
Electronics Point Logo
Continue to site
Quote of the day

-