Maker Pro
Maker Pro

LineX FM transmitter

B

Bob

Jan 1, 1970
0
Hi all,

I've purchased one of these devices and noticed that there appears to
be different frequency selections depending on the country of origin.
Mine covers 7 preset frequencies at the low end of the FM band which
are all fairly close to Radio 2. Some other ads I've seen show the
upper end of the band selectable.
What I was wondering, before I try to open it up, whether it's
possible that the PLL could be modified i.e. if there are any
removeable links inside to set the frequency coverage?

Anyone had any experience of these boxes?

Cheers
Bob
 
J

Jerry G.

Jan 1, 1970
0
Open it and look. I have a feeling that it is burned in, but you can try
anyways...

--

Greetings,

Jerry Greenberg GLG Technologies GLG
=========================================
WebPage http://www.zoom-one.com
Electronics http://www.zoom-one.com/electron.htm
=========================================


Hi all,

I've purchased one of these devices and noticed that there appears to
be different frequency selections depending on the country of origin.
Mine covers 7 preset frequencies at the low end of the FM band which
are all fairly close to Radio 2. Some other ads I've seen show the
upper end of the band selectable.
What I was wondering, before I try to open it up, whether it's
possible that the PLL could be modified i.e. if there are any
removeable links inside to set the frequency coverage?

Anyone had any experience of these boxes?

Cheers
Bob
 
Top