Connect with us

Linear voltage output & displays

Reply to Thread

Discussion in 'General Electronics Discussion' started by paulhelm, Apr 7, 2011.

Scroll to continue with content
  1. Apr 7, 2011 #1
    paulhelm

    paulhelm

    1
    0
    Apr 7, 2011
    Hello. I have a CO2 sensor that hooks up to a relay board for atmospheric control. The sensor outputs a voltage linear to the concentration of CO2 present (.5v = 0ppm, 4.5v = 2000ppm. I'm wondering if there is a way to incorporate a display that will not display the linear voltage but the relative ppm concentration. I was thinking a simple meter display but again, I'm looking for the relative ppm. Thanks
     
    Last edited: Apr 7, 2011
  2. Apr 7, 2011 #2
    shrtrnd

    shrtrnd

    3,796
    503
    Jan 15, 2010
    I've been out of industrial electronics for more than a decade.
    Omega, Newport, Red Lion, half a dozen other places will have the display you need.
    Your issue is an extremely common need, and manufacturers make the solution.
    Good Luck
     
Ask a Question
Want to reply to this thread or ask your own question?
You'll need to choose a username for the site, which only take a couple of moments (here). After that, you can post your question and our members will help you out.
Similar Threads

  1. linear voltage regulator

  2. Linear Voltage regulators

  3. Linear DC voltage inverter

  4. Linear voltage regulator cooling

  5. Linear voltage regulator problem lm338

  6. Problem with output power-linear amplifier

  7. Problems with linear voltage regulators

  8. 5v linear voltage regulator design problem.

Loading...
Electronics Point Logo
Continue to site
Quote of the day

“”

-